5 Laws To Help The Double Glazing Lock Repairs Industry
5 Laws To Help The Double Glazing Lock Repairs Industry
Blog Article
Double Glazing Lock Repairs
A good quality lock on your doors and windows will stop burglars from accessing your home. They don't usually like to break glass or attempt to squeeze through windows.
However, some double-glazing owners have encountered problems with their door or window lock after it's been installed. Fortunately, these issues are often fixable without having to pay for new double glazing.
Broken or damaged locks
If your uPVC window or door lock is broken or faulty or has a problem, a locksmith will repair it for you. They can fix the striker plates, hinges, and locks on your double glazing. They can also reposition the cylinder to correct any misalignment that may be causing your handle not to function properly.
The mechanism may be locked when the key fits into the lock, but it does not turn or is difficult to insert. This could be due to dirt or grime getting stuck within the mechanism. If this is the case, then it is possible to clean the lock and then lubricate it. It is essential to apply a dry lubricant such as teflon or graphite, rather than oil, which can attract dirt and stick to the interior of the mechanism. After lubricating, insert the key into the lock and turn it. The lubricant should work its way into the mechanism, and the lock should be able to turn smoothly.
A faulty lock can also be caused by loose screws inside the mechanism of the lock. They can loosen, fall out, or even break completely, preventing the lock to perform as it should. A screwdriver can be used to tighten the screws but care must be taken not to tighten them too much because this could cause damage to internal components.
A broken lock can be dangerous for you and your family members especially if you have small children. It is possible for them to open the door without knowing and thus give them access to your home. If you're concerned that this might occur, a licensed professional locksmith can help you re-secure the double glazing doors.
Misty Glaze are a professional uPVC and double glazing company in Lancing, who can repair all types of faulty and damaged mechanisms handles, handles, cylinders, and lock systems on uPVC windows and doors. We can also modify your uPVC or double glazing locking system to meet your specific requirements, which means that in most cases, replacement windows and doors are not required.
Broken or Faulty Handles
A lot of double-glazed windows come with the multi-point lock as part of the overall security package. This is a great choice for those who are concerned about opportunistic burglars trying to gain entry into their home. It is also a good idea to ask your installer about anti-lift locks that can be installed in addition to the existing locks and help keep your window firmly locked in the closed position.
Handle locks can be damaged or fail. They are the first part that a criminal will employ to open your window. The good news is that this is one of easiest parts to repair.
Modern handles made of aluminium and uPVC operate a multi-point locking system known as Espagnolette which is designed to resist forced entry. This security upgrade is usually offered as an optional extra on new uPVC window installation. As an alternative upgrade, older style uPVC or aluminium handles that are no longer in use can be upgraded to a shoot bolt locking system.
If a handle is defective, it is essential to get the handle repaired as quickly as you can. Faulty handles can prevent the window from closing correctly and also allowing drafts to enter. It could also be a weakness that thieves can exploit, putting your family's belongings and you at risk.
The process of repairing the damaged mechanism begins with getting access to the window frame and removing the damaged handle. The gearbox can then be accessed to determine the kind of gearbox used to open the handle. This allows an alternative that is compatible with the profile and internal window frame mechanisms.
After the mechanism has been replaced, the handle may be put back together using the original screws. However, we suggest replacing them with larger screws since they provide an even more secure fit. The final step is to apply double glazing repairs near me a coating of clear sealant to shield the handle from further corrosion. After this step is completed the window should be fully functional again at a fraction the cost of replacing it.
Broken or damaged hinges
If your windows don't close properly, you may experience draughts, a weakening of your home's security and an increased risk of water or damp damage. Window hinges that break or become faulty are a common issue and are easily fixed.
If your windows made of uPVC won't open or close, it is likely that hinges need to be repaired or replaced. While many window companies require that you purchase a new window unit to solve this issue We're able to repair the damaged hinges and save you money.
Window hinges are often damaged through repeated use, or weakened over time by corrosion. In the event of a broken hinge, it's important to take steps to prevent further damage by being careful not to push the window to close or open.
You can find the right parts for your hinge by identifying its model. Maco, Mila and Roto are double glazing repair near me all brands of window hinges. It is recommended to consult an expert in this regard to avoid the mistake of purchasing parts that aren't compatible with your current hardware and could cause further damage.
Faulty hinges can be a huge double glazing company near me problem for your uPVC window and doors. They can be an important source of noise and could also allow water to infiltrate your windows.
To fix this issue, first make sure whether the pin barrel on both hinge halves is aligned. If not then tap the headpin using the hammer to make a slight bend in hinge barrel. This will help keep the pin in the right position. Then, ask a helper to hold the door while you take the hinge screws and hinges from both the doorjamb as well as the door. Replace the hinges with those of a matching size and attach the screws using glue. Finally, while the glue is drying, fix the hinges by using weights or clamps.
Once you have repaired your hinges, you can install the door again. You can also reattach the handle. It is recommended to replace the screws using the same length of dowels as the screw that was originally used so that they are in line with each the other.
Glass that is broken or damaged
While uPVC windows do an excellent job of keeping cold out and warm in, they can become damaged over time. This could include cracked or damaged glass, as well as faulty locks. This is a problem that could be extremely costly should it be left unattended. This double glazing units near me can also detract from your home's aesthetics and result in a decrease in insulation. It is crucial to fix any damage as soon as it occurs.
You can repair your cracked glass by yourself if your have the appropriate tools and techniques. Be sure that the area surrounding the broken glass is clear of debris so that any pieces of glass do not cause injuries or trip hazards. Then, remove all broken glass pieces and dispose of them in the proper way. Then, put masking tape over the entire area to keep pieces of glass from scattering and sticking to your skin when you move them. If you're dealing with a double-paned window, it's a good idea to prepare the glass before glueing it back in place so that you know you'll have enough space to complete the project.
Use a clean, dry cloth to wipe down the surface of the broken glass and the frame before applying the glue. Follow the directions for double glazed repairs near me application and curing that can differ from one product to the next. Based on the degree of the crack you may need to clamp the glass in place while it is curing. You can do this using lightweight clamps specifically designed to support fragile materials.
Once the adhesive is fully cure, carefully install the glass into the window frame, making sure that it is flush with the edge of the frame and there aren't any gaps between the glass and the window sash. Avoid bending the glass as you reinstall it, as this could weaken the seal. This can lead to water infiltration or condensation.
Contact a professional glazier, such as O'Brien(r) for an appointment to replace your glass if the window is completely broken. Unattended handling of broken glass can pose a safety risk for pets and children It's therefore essential to act quickly.